FORCE1
16
Problem
Cause
Solution
The LED indicator
on the drone flashes
continuously after
connecting the battery;
there is no response
from the transmitter.
The motor does not
respond to the throttle
lever and the LED
indicator on the drone
flashes.
The tail blades do not
turn.
The blades spin but the
drone does not take off.
The drone continues to
spin after making trim
adjustments or the left/
right yaw speed is not
consistent.
The drone shakes or tilts
sideways during flight.
The drone keeps drifting
in one direction.
The drone is not
responding.
The transmitter and drone are not paired.
The drone battery level is too low.
The blade is too close to the motor.
1. The blades are damaged.
1. The blades are damaged.
The blades are damaged.
The gyroscope is not calibrated properly.
2. The drone battery level is too low.
2. The motor is damaged.
1. The drone and/or transmitter are
switched off.
2. The batteries in the drone and/or
transmitter are dead.
3. The batteries are not inserted properly.
Refer to pg. 10 to pair again.
Charge the battery or replace it with a fully
charged battery.
Pull the blade upwards so that it is not too
close to the motor.
1. Replace the damaged blade(s).
1. Replace the damaged blade(s).
2. Replace the damaged motor(s).
Replace the damaged blade(s).
Make trim adjustments to the drone after
turning it on (pg. 12).
1. Turn on the transmitter and drone, and
ensure that the battery is inserted properly.
2. Charge the batteries; use fully charged
batteries.
3. Insert the battery again and ensure that
the terminals are connected properly.
2. Charge the battery or replace it with a
fully charged battery.
TROUBLESHOOTING GUIDE
Summary of Contents for halo3000
Page 2: ......
