FORCE1
8
BATTERY REMOVAL
Make sure the drone power switch is in the “OFF” position. Open the battery cover (Fig. 1) and disconnect
the wire of the battery from the receiver wire.
DRONE ASSEMBLY
BATTERY INSTALLATION
1. Open the battery cover by sliding the cover over and lifting up (Fig. 1).
2. Connect the wire of the 3.7v lithium battery to the receiver wire in the power port (Fig. 2).
3. Replace the battery cover, and move the power switch to the “ON” position.
Install the battery firmly; failure to do so may affect flight safety.
CAUTION:
FIGURE 1
FIGURE 2
Summary of Contents for halo3000
Page 2: ......
