HALO3000
User Manual
15
FUNCTIONS
ALTITUDE HOLD MODE
Altitude Hold Mode indicates the drone maintains a consistent altitude
while allowing roll, pitch and yaw to be controlled normally. It makes it
easier to control the drone for beginners.
Push the THROTTLE/RUDDER STICK up/down to fly the drone up/down
at certain altitude and then release the stick. The stick will return to the
center position (Altitude Hold Center) as shown in Figure 13 and the
drone will keep flying at its current altitude. Repeat the above steps if
you want to change the drone altitude (default mode).
FIGURE 13
NOTE:
Altitude Hold Mode can’t be used when the blades are deformed or damaged. Also, the drone may
be unbalanced within one minute of flying due to temperature variation. This will cause it to slowly
ascend or descend. When this happens, correct the drone’s elevation using the throttle stick.
SPEED MODES
LOW BATTERY WARNING
The HALO3000 has two speed modes: Low and High. To switch speed modes, press the Speed Mode
button (Fig. 14). The transmitter will beep twice to indicate that it is in High Speed Mode, or once for
Low Speed Mode. The speed mode may be changed during flight.
Your drone’s lights will flash and the transmitter will beep in midflight when the battery is low. This
means you have 30 seconds to land your drone before you lose power.
FIGURE 14
Summary of Contents for halo3000
Page 2: ......
