CLICK FOR F
AST
-NA
V
F-SERIES
CHARGER TIPS
F200-SERIES CHARGER TIPS
GENERAL DRONE F
AQ
GENERAL
RC BOA
T F
AQ
F200 SHADOW/SPECTER FLYING TIPS
How do I turn on and pair my drone?
1. Turn on the transmitter while holding down the red button. Wait
for the transmitter light to flash green. (Figure 1)
2. Immediately plug in drone battery once light starts flashing. You
should hear a beep, and see the drone flashing red, green and
yellow.
3. Move both sticks to the bottom-left position. Wait for the drone
lights to flash yellow. Now your drone is ready for calibration.
How do I calibrate my drone?
4. Put down transmitter. Rotate the drone horizontally (while it’s parallel to the ground) until you see solid
green lights. (Figure 2)
5. Now, point the drone nose down and rotate the drone until you see solid red and yellow lights. Then,
set the drone back on the ground. (Figure 3)
6. Push both joysticks down and inward (aka “toeing in”). The propellers will start, and your drone is ready
to fly. (Figure 4)
NOTE: These instructions can also be found in your User Manual.
Figure 1
Figure 2
Figure 3
Figure 4
