EN
128
– before checking, cleaning or per-
forming other work on the unit;
– before removal of obstructions;
– after contact with foreign ob-
jects;
– if the unit starts vibrating exces-
sively.
If the unit starts vibrating exces-
sively, an immediate maintenance
is necessary:
– check for damages;
– have all damaged parts repaired;
– check for loose parts and reat-
tach them tightly.
b)
While cutting, ensure that there
are no persons (particularly chil-
dren) or animals in the working
area. Ensure that children do not
play with the unit.
c)
Before switching on the shear, en-
sure that the working area is free
of stones and pieces of wire. Look
out for them while cutting and
search the hedge for concealed
objects, such as wire fences.
d)
Use the unit only in daylight or in
good artificial lighting.
e)
Use the unit in dry conditions only.
Protect it from rain and moisture.
f)
Ensure that the shear does not
touch the ground or other objects.
g)
Wait until the electric power tool
has come to a standstill before
putting it down.
h)
When interrupting work, never
leave the unit unattended and
keep it in a safe place.
i)
Always switch the shear off be-
fore transporting it to other work-
places.
j)
Never grasp the blade of the shear.
k)
Ensure that all guards and han-
dles are fitted before using the
unit. Never attempt to switch on
an incompletely assembled unit
or a unit which has unauthorised
modifications.
l)
Operate the unit only in the tech-
nical condition stipulated and
delivered by the manufacturer.
Unauthorised changes to the unit
exclude liability of the manufactur-
er for any resulting damage and/or
injury.
m)
Spare parts must conform with
the requirements specified by the
manufacturer. Therefore use origi-
nal spare parts only or spare parts
authorised by the manufacturer.
When replacing parts, please fol-
low the supplied installation in-
structions and remove the power
source/ battery beforehand.
n)
Have repairs carried out exclu-
sively by a qualified technician or
a service centre.
m)
Use of the machine must be pre-
vented if people, especially chil-
dren and house pets are present.
n)
Prior to using the machine, in-
spect it visually for damaged,
missing, or incorrectly attached
protective devices or coverings.
o)
Eye protection, long pants, and
sturdy footwear must be worn
the entire time the machine is
used.
p)
Only switch on the device if your
hands and feet are away from
the cutting tools.
q)
Disconnect the tool from the
power supply before mainte-
nance and cleaning.
r)
The tool should be inspected
and maintained regularly by a
responsible repair service only.
s)
Warning! Do not touch mov-
ing dangerous parts before the
machine has been switched off
and the moving dangerous parts
have come to a complete stand-
still.
RESIDUAL RISKS
Residual risks remain even if the
hedge trimmer is used properly. The
hedge trimmer‘s design can entail the
following hazards:
Summary of Contents for 4306517370541
