19
7. Control Module
Make sure to shut down the power when replacing the control module.
7-1. Internal Control Module Settings
Open the front panel and pull the module out using the handle.
Switch S1
CPU reset switch. Not used normally.
Switch S3
Reset switch for the built-in hub. Not used normally.
Micro SD CARD
Connector
For maintenance purposes only. Do not connect a Micro SD CARD.
DS1 Settings
No
Factory Setting
Description
1
On
Do not change the setting. (Fan speed control)
2
On
Do not change the setting. (Fan speed control)
3
Off
Do not change the setting.
4
Off
Do not change the setting.
5
Off
Do not change the setting.
6
Off
Do not change the setting.
7
Off
Do not change the setting.
8
Off
Do not change the setting.
S1
S3
Handle
DS1
8
ON
1
DS2
8
ON
1
Micro SD Connector
