FOR-A FA-10DCCRU, Operation Manual, Page: 134 / 300

118
6-9-6. Dolby ENCODER INPUT
* Menu is available only if the FA-95DE-E option is installed.
D o l b y E N C I N P U T 3 0 6
I N P U T : D I R E C T I N S E L
C H S E L : C H 1
A S S I G N : S O U R C E 1
Parameter Default Setting range Description
INPUT DIRECT IN SEL
DIRECT IN SEL
Dolby DEC OUT
Selects a signal to be input to the
Dolby encoder.
*1
DIRECT IN SEL: SOURCE
channel signals
Dolby DEC OUT: Output signal
from the Dolby decoder
CH SEL CH 1 CH 1-8
Selects a channel to which to
assign a signal.
ASSIGN SOURCE 1
*2
When DIRECT IN SEL is
selected:
SOURCE 1-16
PCM DOWNMIX-L
PCM DOWNMIX-R
500Hz TONE
1KHz TONE
SILENCE
When Dolby DEC OUT
is selected:
Dolby DEC 1-8
DolbyDM-L
DolbyDM-R
500Hz TONE
1KHz TONE
SILENCE
When INPUT is set to DIRECT IN
SEL:
SOURCE 1-16 : SOURCE signal
selected in the 6-5 AUDIO
MAPPING (MAPPING) menu
PCM DOWNMIX-L/R : Down
mixed signal generated from
SOURCE channel signals.
500Hz/1KHz TONE : Test signal
(TONE)
SILENCE : Mute signal
When INPUT is set to Dolby DEC
OUT:
Dolby DEC1-8 : PCM signal output
from the Dolby decoder
DolbyDM-L/R : Down mixed
signal generated from
Dolby-decoded PCM signal
500Hz/1KHz TONE : Test signal
(TONE)
SILENCE : Mute signal
*1 DIRECT IN SEL and Dolby DEC OUT settings are retained until changed. When an INPUT
setting, DIRECT IN SEL or Dolby DEC OUT, is changed, CH1-8 signal assignments will be
changed to that of the INPUT selection. DIRECT IN SEL and Dolby DEC OUT signals
cannot be input to the Dolby encoder together. Dolby Digital signal output from the Dolby
decoder, Dolby DEC OUT, cannot be encoded to the Dolby E signal.
*2 SOURCE channels corresponding to CH1-8 will be the default value.
(CH1: SOURCE 1 - CH8: SOURCE 8)
If INPUT is set to Dolby DEC OUT, the settings will be; CH1: Dolby DEC 1 - CH8: Dolby
DEC 8.
Menu button
VIDEO OP
AUDIO OP