Sensor Range
This sensor faucet can automatically adjust the
inductive range within 10 seconds of electrification.
Do not use inductor during this period so that the
inductor can automatically adjust to a suitable
inductive range.
Set Water Flow Time-Out
The sensor faucet will shut off the water when
washing time exceeds 1.5 minutes. If follow-up
washing is needed, re-induce after removing hands
for 2 seconds.
Notes
1. Please use the AA type alkaline battery (1.5v for
each).
2. Place batteries into each indicated spot. Utilizing
new batteries of the same brand is best. If mixed, it
could shorten the battery life to 1-2 months.
3. After installation of the battery, the solenoid valve
will do its self-testing.
4. Wait ten seconds for power to be applied and
allow the sensor faucet to self-adjust sensor
distance. Do not use your faucet during this time.
5. If the sensor distance is too short, please move the
barrier from the faucet for 5-6 mins and allow the
sensor faucet to adjust to normal.
6. If the sensor distance is too far, and water flows
continuously, the sensor faucet will self-adjust the
distance after 5 mins.
Incorrect Placement
Keep sensor range adjustment
within 4 inches away from center
of spout. This can only be done
with optional remote control.
Installing electronic soap dispenser
& faucet with intersecting centerline
might lead to accidental activation
of either or both.
Faucet
Faucet
Soap
Dispenser
Soap
Dispenser
Correct Placement
Keep sensor ranges
factory preset.
Keep soap spout & faucet
centerline parallel.
Faucet
Faucet
Soap
Dispenser
Soap
Dispenser
General Information
Battery Override
In the event of a power failure, the sensor faucet will
automatically switch to battery-operated mode to
ensure the faucet continues to function. The sensor
faucet can also operate on the battery alone if no
main power source is available.
Hygienic
The proximity sensor faucet removes the need to
touch the faucet body, reducing the spread of
germs and the chance of cross-contamination.
Fontana Sensor Faucets
©
Fontana Sensor Faucet
Customer Service: 800-684-4489
fontanasensorfaucets.com
Our sensor spouts have a non-touch control which
uses infrared sensing technology to detect human
presence. Once detected, the spout instantly
dispenses water and automatically stops once the
user moves their hands away to eliminate
unnecessary water wastage, whilst creating a more
hygienic washroom solution.
All products manufactured and supplied by Fontana
are safe and comply to legislative requirements.
Providing they are installed correctly and receive
regular maintenance in accordance with these
instructions your user experience will not be
affected.
6
