background image

Outlet

Inlet

This way up

G1/2

4.7 inch

5 inch

G1/2

1. Remove Control Box Cover

Remove all four screws in each corner of the control 

box and remove the cover.

2. Remove Battery Box & Insert Batteries

Remove the battery case from the control box and 

remove the screw from the center of the battery 

case. Insert 4 AA batteries (batteries not included) 

into the battery box ensuring they are inserted the 

correct way.

3. Reinstall Battery Box & Control Box Cover

Re-install the battery box cover, matching the 

alignment arrows together. Set the battery box back 

into the control box, and re-assemble the control 

box cover using the previously removed screws 

ensuring they are all fully tightened.

Cover

Battery case

Battery Connector

Cover screws

Battery compartment

4a. Placement and Mounting Installation

Choose a location under the sink basin to mount the 

control box, such that the sensor cable, flexible hose, 

and incoming water supply all connect to the 

control box. Under the sink basin, drill a hole 

minimum  3/4”  to  fit  the  sensor  cable  and  flexible 

hose from the spout. Feed the sensor cable and 

flexible hose through the hole.

  Control Box Installation Instructions 

Fontana Sensor Faucets

©

Fontana Sensor Faucet

Customer Service: 800-684-4489

fontanasensorfaucets.com

3

Summary of Contents for FS-509AB








Reviews: