EN
- 2 -
DESCRIPTION
- Microphone with 6 zone selector.
- Remote playback of 6 messages.
- Chimes.
- Internal memory to store messages and chimes.
- Aux input.
- For the multizone amplifier mod.
MPZ-6480RGU
.
CONTROLS AND FUNCTIONS
FRONT PANEL
1.-
MESSAGES (1-6)
: activation buttons of the 6 messages stored in the amplifier memory that can be
played in one or several of the zones. When activated, it lights up in blue. It’s only possible to select
one message at a time.
2.-
REPEAT/STOP
: allows loop playback to be started. The message will be played indefinitely until
REPEAT/STOP is pressed again or an input with higher priority is activated.
3.-
START/STOP
: allows playback of a message to be started in simple mode. If you wish to stop playback
before the message finishes, press the START/STOP button again.
4.-
ZONES (1-6)
: buttons to activate the zones in which a message is going to be played or an announcement
to be made. Several can be selected simultaneously.
5.-
ALL CALL
: allows simultaneous selection of all zones to play a message or make an announcement.
6.-
TALK
: microphone activation button. If the button is pressed, the microphone signal will be sent to the
active zones.
7.- Microphone socket.
8.-
POWER
: power switch.
9.-
DATA
: operating indicator. It flashes when the data bus is being used.
10.-
BUSY
: busy line indicator. If the BUSY indicator is lit, you must wait for it to switch off to be able to
speak, as another
MZ-648
microphone is in use at that moment.
