EN
- 4 -
12.-
SIREN GAIN
: control that regulates the volume level of the alarm.
13.-
CHIME GAIN
: control that regulates the volume level of the CHIMES.
14.-
COM
: common terminal which activates the warning tone or the alarm via contact closure.
15.-
CHIME
: contact closure that activates chime sound.
16.-
SIREN
: contact closure that activates the siren sound.
17.-
24 V DC, 8 A
:
24 V DC supply terminals. For amplifier operation with 24 V DC power supply, batteries, emergency
power supply system, etc. Connect with 2.5 mm
2
section cable to the - negative and + positive
terminals.
Note
: when using a 24 V DC amplifier, the output power is reduced by approximately 20%.
COM
: common connection terminal.
4-16 Ω
: output for low impedance loudspeakers 4-16Ω.
70 V/100 V
: terminals for connecting loudspeakers with 70 or 100 V line transformer. Connect the
positive terminal of each zone to the corresponding 70 or 100 V terminal and common terminal to the
COM terminal.
18.- AC power socket.
REMOTE CONTROL
1
2
3
4
5
6
7
8
9
0
EQ
MODE
STOP
1
2
3
5
6
7
9
4
8
10
1.- : switches the MP3/FM module on/off.
2.-
STOP
: in playback mode, stops playback.
3.-
: mutes the audio output of the MP3/FM module.
4.-
MODE
: allows you to select between the different operating mode.
5.-
: this button allows you to change the playback mode: repeat one track (1), repeat tracks in a
folder (F), repeat all tracks (A) and shuffle (R).
6.-
EQ
: EQ control: Flat (fla), Classic, Pop, Rock, Jazz and Voice (voc).
7.-
/ : in playback mode, a short press of these buttons skips to the previous/next song. And a long
press performs a fast rewind/fast forward of the song. In radio mode, one press of these buttons
switches to the previous/next stored station.
8.-
: in playback mode, one press of this button starts/pauses playback. In FM mode a short press
allows you to perform an automatic station scan.
9.-
/
: MP3/FM module volume controls.
10.-
0-9
: numeric selection buttons.
