EN
- 4 -
DESCRIPTION
P. A. amplifier with 5 x 100 V line output zones and independent volume control per zone, with the possibility
of remote paging through the zone selector microphone model m-512.
120 W RmS, 4 mic. inputs, 2 auxiliaries and 1 emergency.
Chimes.
CONTROLS AND FUNCTIONS
FRONT PANEL
1.-
PROT
: lED indicator which lights up when an anomaly is detected due to temperature, surges due to
voltage or current, or short-circuit. When the protection is activated, the output signal is cut and in this
case you have to switch off the amplifier, correct the cause of the anomaly, let the amplifier stand for a
few minutes and then switch it on again. if the protection continues, then call the technician.
2.-
lED indicators which indicate the level of the output signal.
3.-
CLIP
: lED indicator which lights up when the output signal is saturated. lower the mASTER volume
control until the lED indicator goes off.
4.-
ALL CALL
: button for activating/deactivating all zones at the same time.
5.-
ALL CALL
: lED indicator which lights up when all zones are active.
6.-
ZONE 1 to 5:
lED indicators for each zone. They light up when the corresponding zone is active.
7.-
ZONE 1 to 5:
zone selection buttons. for activating or deactivating each zone.
8.-
Control wheel with 6 positions which regulates the individual volume in each zone.
9.-
BASS, TREBLE:
control wheels which strengthen or weaken the bass or treble frequencies, ±12 dB on
each of the microphone and line inputs.
10.-
MIC 1 to 4, LINE 1 to 2
: control wheels which regulate the volume in the microphone and line inputs.
11.-
CHIME/SIREN
: lED indicators which light up when the chime or the siren is selected, respectively.
12.-
SIREN/VOLUME
: siren selector button. if the button is pressed, the siren will be heard in all the active
zones. it is adjusted using the siren volume control wheel.
13.-
CHIME/VOLUME
: chime selector button. if the button is pressed, the chime will be heard in all the
active zones. it is adjusted using the chime volume control wheel.
14.-
MASTER
: control wheel which regulates the master volume output for all inputs.
15.-
DC:
lED indicator which lights up when the system is connected to 24 V DC.
16.-
ON/OFF:
amplifier on/off switch.
