FONESTAR MA-125Z, Instruction Manual

Page: 7 / 12

CONNECTION
Make the connections with the amplifier and all the audio system components switched off and disconnected
from the power supply.
Firstly, connect the audio sources to the inputs. Connect the loudspeakers to the loudspeaker output. Use
the low impedance 4 Ω output or the high impedance 100, 70 or 25 V line output, depending on the type of
loudspeakers you are going to connect. Do not use the two types of output at the same time.
If you are using the low impedance output, you must connect the speakers in a series/parallel circuit so that
the loudspeaker charge impedance is the same as the amplifier output impedance and the power supplied
by the amplifier does not exceed what is withstood by the loudspeakers.
If you use the high impedance 100, 70 or 25 V line output, all the loudspeakers must be connected in parallel
and the sum of the power of all the loudspeakers must not exceed the power supplied by the amplifier.
Once the connections have been made depending on your needs, connect the equipment to the mains and
switch them on. After use, do not forget to switch the equipment off and disconnect it from the mains.
- 7 -
EN
MA-125Z_MANUAL_(EN)_20170824_Maquetación 1 24/8/17 10:23 Página 7