17
1.8.
"Manual" programme setting
The "manual" mode selection indicated with symbol
, allows activating the heating function, 24 hours a day, in both zones at the "day temperature",
disabling at the same time zone 1 and zone 2 programming. The water heater on the other side, is heated according to the specific programme.
1- Press “prog” to access the
manual programme setting
mode.
2- Press “ok” to confirm manual
programming activation.
Press "reset" to go back to the
starting page, namely to quit
the function.
1.9.
"Automatic" programme setting
The selection of "automatic" mode, identified by symbol
, allows boiler to enable heating of both zones in "day temperature" or "night
temperature", based on the programming envisaged for zone 1 and zone 2.
1- Press “prog” to access the
automatic programme setting
mode.
2- Press “ok” to confirm
automatic programming
activation. Press "reset" to
go back to the starting page,
namely to quit the function.