16
1.7.
"Day temperature" and "night temperature" setting
When one or more ambient probes are connected to boiler electronic board, two levels of ambient temperatures can be set. Boiler will manage the
heating request based on the set temperatures, as follows. If no ambient probe is connected to the boiler, temperatures cannot be set.
"Day" temperature is identified by the symbol
, while "night" temperature by the symbol
.
The "day temperature" is active when bars are on, while "night"
temperature is active when bars are off.
1- Press “set” twice to access
the "day temperature" setting
mode.
2- Press “CH + and -” buttons to
edit "day temperature" values.
Press "ok" to confirm the edited
values and enter the "night
temperature" setting mode.
3- Press “CH + and -” buttons to
edit "night temperature" values.
4- Press "ok" to confirm the
edited values and quit the "day
and temperature" setting mode.
Bars "off"
Bars "on"