20
When using the supporting brackets, with the relevant kit (accessory), it is possible to install the equipment after laying down the pipes
(all information necessary for installation is attached to the kit).
Here below are some examples for this application:
Front view
Fig. 16A
Rear view
Fig. 16C
Ø 60
W
Ø 35 mm
mm
Fig. 17
4.2.3 Roof vent
When using the roof vent, the accessory (diameter 60 mm) must be used as a vent terminal.
The final pipe must then be diameter 60 mm: if the pipes used are 35 mm, it will be necessary to use the adapter W 35/60, available
as an accessory (Fig. 18).
Rear view
Fig. 16B
