10
2.2.6 Customised programming
The equipment allows you to program a customised schedule replacing the factory default one.
Programming a schedule means:
- setting periods of time when equipment keeps a Comfort temperature (represented by the sun symbol )
- setting periods of time when equipment keeps a Reduced temperature (represented by the moon symbol )
Resolution is 30 minutes: every day is broken down in 48 time intervals.
Set customised programming schedule as follows:
- press key
- turn knob and select the symbol P
-
press knob to confirm
Selecting temperature levels
After confirming symbol
P
:
- the sun symbol
and the Comfort temperature value are displayed flashing
- turn knob until reaching the required temperature level
-
press knob to confirm
- the moon symbol
and the Reduced temperature value are displayed flashing
- turn knob until reaching the required temperature level
-
press knob to confirm
Selecting the day or a group of days for the schedule
After confirming the temperature levels:
-
on the LH side of the display is a number indicating day 1 (Monday), flashing
- turn knob to highlight:
» in a sequence the numbers for the week days (1 = Monday), then
»
a group with the five work days (1-2-3-4-5), then
» a group with the two weekend days (6-7), then
» a group with all week days (1-2-3-4-5-6-7)
-
select the required day or group and press knob to confirm.
Setting the schedule
After confirming the day or group of days to program:
- at the centre of the display are four digits representing the programming interval: every day is split
into 48 intervals (one every half an hour).
- at the bottom of the display is the programming bar made up of 48 points with the indication of the
hours in a day below, and segments above;
- the presence of a segment means the equipment is operating at the Comfort temperature; the
absence of the segment means the equipment is operating at the Reduced temperature
- turn knob to shift cursor
- press knob once and the sun symbol appears
- press knob a second time and the moon symbol appears
- press knob a third time and no symbol appears
- if you press it again, this sequence will roll over again
• no symbol means that the knob can be used to scroll the programming bar without changing the schedule
• sun symbol present allows setting the operating periods at Comfort temperature level
• moon symbol present allows setting the operating periods at Reduced temperature level
- after selecting the sun symbol or the moon symbol according to required equipment operation, turn knob to select the period
of interest and press knob to confirm. This operation must be repeated for all periods of interest, for the selected days or groups of
days
- press key
to save the schedule for the current day or group of days
- select another day or group of days to be programmed and repeat the above-described sequence or quit programming by pressing
key
0 1
3
5
1
7
9 11 13 15 17 19 21 23
1
