16
4. INSTRUCTIONS FOR INSTALLER
This part of the manual contains the instructions for installing the gas convective stove and is addressed to authorised installers, which
are the only persons authorised to carry out installation operations.
WARNING
Before installing the equipment, check that its technical data correspond to the requirements for its correct use in the
system. The type of gas required and the relevant supply pressure are specified on the technical data label on the equip
-
ment.
4.1 Choosing the positioning
The gas convective stove Gazelle EVO can be installed in any point of the room to be heated.
The equipment comes as standard with straight pipes 59 cm long, that can be used for installation on a wall communicating with the
external environment, or can be replaced by pipes up to 1 m long, if needed.
The equipment can be positioned onto walls not directly communicating with the external environment by implementing venting solu-
tions including elbows and pipe extensions, see some examples (paragraph
4.2.2. Vent pipe with extensions or elbows
).
The gas convective stoves are “type C” sealed appliances as defined by the regulations and
all tubes, intake and vent terminals
are considered a part of the equipment.
Use original accessories supplied by the manufacturer any time extensions for the vent pipes are required.
