12
7.
CLEANING THE RADIATOR
For safety reasons, disconnect the power supply before cleaning the appliance.
Cleaning must be done when the radiator is turned off and is cold.
Do not use abrasive or corrosive products to clean the body: use soapy water, for example, and dry the external casing with a soft cloth.
Clean plastic parts, controls and the humidifier with a dry cloth only and avoid contact with chemicals or alcohol.
Summary of operating modes:
Mode
Description
Setting: Daily and weekly programming which sets the two temperature levels (Comfort and Night-time) defined by the user
for each time of day
Pilot wire:
The temperature depends on the Pilot Wire control (for radiators installed in France only)
Stand-by:
The receiver is in stand-by
Comfort:
Comfort status and the temperature which the environment must be kept at are transmitted
Night-time
Night-time status and the temperature which the environment must be kept at are transmitted
Anti-freeze:
Minimum safety temperature: a fixed value equivalent to 7ºC is transmitted
Keypad lock:
Pressing on the keypad does not change functions; the keypad is not active
Err S
The temperature sensor is broken
Summary of Contents for Alcor FD
Page 15: ...15...
