8
6.
REGULATION AND PROGRAMMING
IMPORTANT: When using a Remote Control please refer to the instructions provided with the Remote Control itself.
6.1.
Turning the radiator on
The appliance is regulated using four keys, as shown in the figure. When the appliance is in stand-by mode, the black dot on the screen will blink. To
turn the radiator on, press the ‘on/off’ key, as shown in the following figure:
The radiator has various operating modes, as shown in the table on page 13.
When the radiator is in clock mode, the screen shows the time; in the other modes it shows the programmed temperature. A small icon indicates the
current mode.
There is an LED light on the control panel: when the system is in heating mode and the room temperature has not yet reached the desired
temperature programmed by the user, the LED is RED. Once the room reaches the programmed temperature, the LED turns GREEN.
6.2.
Changing the mode
Press the ‘mode’ key to select the desired mode:
ICON INDICATING THE
SELECTED MODE
PROGRAMMED TEMPERATURE
LED
Summary of Contents for Alcor FD
Page 15: ...15...
