10
6.5.
Setting times and weekly programming
Press the ‘stand-by’ and ‘mode’ keys at the same time and hold for three seconds.
You can now assign a setting to each day of the week. When a segment appears between two times on the programming bar (at the bottom of the
screen), this indicates that the TH temperature level has been selected for this period. The absence of a segment indicates that during this period,
the radiator will keep the temperature at the TL level.
Starting from day 1, select the times when the TH temperature is desired. Pressing the + key activates the segment on the screen, and therefore TH
as well. Pressing the - key deactivates the segment and the programmed temperature will be equivalent to the TL level.
A dot will blink on the screen next to the days of the week. The current day can be selected using the plus or minus key. Use the ‘mode’ key to confirm
the selection.
The number corresponding to the hour will blink. Set the correct time using the plus and minus keys. Confirm the selection with the ‘mode’ key.
The number corresponding to the minutes will blink. Set the correct minutes using the plus and minus keys. Confirm the selection with the ‘mode’ key.
DAY SETTING
HOUR SETTING
MINUTE SETTING
Summary of Contents for Alcor FD
Page 15: ...15...
