9
6.3 Programming TH and TL temperatures
It is possible to programme two separate temperature levels: TH is the desired ambient temperature during operation in Comfort and Pilot Wire
mode or when programming; TL is the ambient temperature in Night-time Reduction mode.
These two temperature levels can be programmed using the plus and minus keys. A blinking thermometer icon on the screen indicates that the
temperature is being programmed.
TH can be programmed in Comfort mode, TL can be programmed in Night-time Reduction mode.
The two temperature levels are also used when programming:
0
2
4
6
8 10 12 14 16 18 20
TL
TH
THERMOMETER
6.4 Setting times and weekly programming
Press the ‘stand-by’ and ‘mode’ keys at the same time and hold for three seconds.
A dot will blink on the screen next to the days of the week (1-7). The current day can be selected using the plus or minus key. Use the ‘mode’ key to
confirm the selection.
The number corresponding to the hour will blink. Programme the correct time using the plus and minus keys. Confirm the selection with the ‘mode’
key.
The number corresponding to the minutes will blink. Programme the correct minutes using the plus and minus keys. Confirm the selection with the
‘mode’ key.
TEMP
ER
ATURE
TIME
TH is the desired ambient temperature during the time periods selected; TL is the (reduced) desired temperature outside the selected time periods.
Summary of Contents for AL-ADVANCE
Page 15: ...15 Notes...
