Manual #26-0111200-00 / Revision E
ScreenPro Multi-Screen Remote 56
The argument to this command is a BlendPro RS485 query command. Please refer to the BlendPro
user’s manual for available commands and format.
Example:
BPQUERY
*4YINFOBP!
Force Screen Black
FSB
[dddd] [bus]
Description:
Forces the selected screens’ Program or Preview black. To “unblack” a screen, use the
SI
command to select an input source.
Parameters:
[dddd] – bitmap of selected screens, maximum of 4-Hex digits
[bus]
– bus selection,
V
or
P
= Preview,
G
or
M
= Program (Main)
Example:
FSB 3 V
Preview screens 1 & 2 will go Black.
FSB F M
Program/Main screens 1, 2, 3, and 4 will go black.
Freeze Screen
FZ
[dddd] [bus] [mode]
Description:
Freezes or unfreezes the program or preview bus of a particular set of screens.
Parameters:
[dddd] – bitmap of selected screens, maximum of 4-Hex digits
[bus]
– bus selection,
V
or
P
= Preview,
G
or
M
= Program (Main)
[mode] – 0 = Unfreeze the image. 1 = Freeze the image
Example:
FZ 0003 G 1
Freeze Screens 1 and 2 on Program.
Group Assign
GA
[groupNum] [dddd]
Description:
Assigns a specific set of destinations to a particular group.
Parameters:
[groupNum] – The group number the destinations are to be assigned to. Range is 1-4, inclusive.
[dddd] – bitmap of selected destinations, maximum of 4-Hex digits
Example:
GA 4 0005
Assigns screens 1 and 3 to group 4.
GA 1 30
Assigns Aux 1 & screen 5 to group 1, assuming we have a 5-screens system.
Key Screen
KEY
[sn] [mode] <threshold>
Description:
Enables/Disables luminance keying option for a particular screen at a given threshold. If Keying is
unavailable due to PIP being enabled on that screen, the command will be ignored. If the keying
threshold is not specified, the current threshold value of the screen of interest will be used.
Parameters:
[sn]
– Screen number on which to enable or disable keying. Range is 1-6.
[mode]
– 0 = Keying Off, 1 = Keying On.
<threshold>
– Luminance Keying Threshold. Range is 0-100. Optional.
Example:
KEY 2 1 18
Turns screen 2 keying on, and sets the threshold to 18.
KEY 2 0
Turns Screen 2 Keying Off.
