Manual #26-0111200-00 / Revision E
ScreenPro Multi-Screen Remote 14
PIP D key. The size and position of the PIP will be saved in non-volatile memory in the controller. To recall this
preset, press the appropriate PIP [A-D] key. All active preview screens will have the PIP recalled to them.
Keying Presets
To save KEYING parameters for quick recall, use the Learn Key. For example, configure the image you want to key
in Preview on a specific screen. Press and hold the Learn Key and press Preset 1. The keying parameters are now
saved in Preset 1. To verify that the keying parameters are saved, simply press the Preset 1 key.
Configuration
Configuration is done using the Configuration Keypad and the joystick. Changes and settings are viewed on the VFD
Display. Configuration includes Input Configuration, Output Configuration, and System Configuration.
The easy to use Configuration menus are keypad driven. Abbreviated instructions are viewed on the VFD Display to
assist in menu navigation.
The following abbreviations are frequently used:
o
[JOY XY]
- this adjustment is done by moving the joystick up and down or left and right
o
[JOY Y]
- this adjustment is done by moving the joystick up and down
o
[+]
- this function is activated by pressing the +/ON key
o
Æ
- use the right arrow key to display the next menu
Menu navigation is performed using the arrow keys.
o
The right arrow key, indicated by
Æ
, is used to display the next menu.
o
The left arrow key, indicated by
Å
, is used to exit a menu and return to the previous menu.
o
The up and down arrow keys are used to move within a menu. The current menu item will be highlighted to
indicate that it is the current choice.
o
Most of the menu selections are updated by pressing the +/ON key to increment the item or the -/OFF key to
decrement the item. The joystick knob can be used in most cases as well to change a value.
o
To Exit a menu, press and hold the
Å
key and push any “Menu” key (INPUT, OUTPUT, SYSTEM or FILE).
After leaving a menu, only the Status information will be shown on the VFD.
Status Configuration Display
The first three lines of the VFD display are dedicated to the display of the system status information. This information
includes:
o
Number of available input sources (IN: #)
o
Number of ScreenPROs detected in the configuration (SCN: #)
o
Number of BlendPros detected in the configuration (BP: #)
o
Currently selected transition effect (mix, wipe, etc.) from the Effects keypad and MIX/WIPE keys.
o
Currently selected (RATE: #.#)
o
Currently selected (M_RATE: #.#)
o
Currently selected Preset Page (PG: #)
