Follett Symphony C25CR400A, Installation, Operation And Service Manual

Page: 5 / 36

25/50 Series 220 V 60 Hz/230 V 50 Hz Dispensers 5
Plumbing
25/50C with 25/50H with 25/50C with 25/50H with 25/50FB
RIDE RIDE integral integral ice machine
ice machine ice machine ice machine ice machine in base
Dispenser drain
1
3/4" FPT 3/4" ID tubing 3/4" FPT 3/4" ID tubing 3/4" FPT
Ice machine drain
1
3/4" MPT 3/4 MPT – – 3/4" MPT
Dispenser water inlet
2
3/8" push-in 3/8" push-in 3/8" push-in 3/8" push-in 3/8" push-in
RIDE IM water inlet
2
3/8" push-in 3/8" push-in – – –
Cond. ’’ – w/c only 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT
Cond. drain – w/c only 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT
Note: Water shut-off recommended within 3m (10 feet) of dispenser. Drain to be hard piped and insulated, and maintain
slope of at least 20mm per 1m run (1/4" per foot) of slope. All plumbing connections must be made in accordance with
local building codes.
Ventilation clearances
Countertop and wall mount models with RIDE ice machine (C/E25CR400A/W, C/E50CR400A/W, C/E25HR400A/W, C/
E50HR400A/W) — none. 305mm (12") at top advised for service.
Countertop and wall mount models with integral ice machine (C/E25CT400A/W, C/E50CT400A/W, C/E25HT400A/W, C/
E50HT400A/W) — 153mm (6") at top. 153mm (6") each side advised for service.
Freestanding models (C/E25FB400A/W, C/E50FB400A/W) — 102mm (4") at rear. 305mm (12") at top advised for service.
1 Includes adapter kit to 3/4" barb fi tting and 6' 3/4" ID vinyl tube
2 Includes adapter kit – 6' 3/8" OD tubing and adapter to 1/2" BSP
Specifi cations
Electrical
1. Models with RIDE ice machines (C/E25CR400A/W, C/E50CR400A/W, C/E25HR400A/W, C/E50HR400A/W)
Ice machine Dispenser
Basic electrical: 220 V 60 Hz/230 V 50 Hz 5A 1.5A
2. Freestanding models and models with integral ice machines (C/E25FB400A/W, C/E50FB400A/W,
C/E25CT400A/W, C/E50CT400A/W, C/E25HT400A/W, C/E50HT400A/W)
Total system
Basic electrical: 220 V 60 Hz/230 V 50 Hz 6.5A
3. Dispensers and RIDE ice machines are supplied with a 2m (7ft) power cord.
Ambient
Air temp 38 C/100 F max. 10 C/50 F min. (best performance below 27 C/80 F)
Water temp 32 C/90 F max. 4 C/40 F min. (best performance below 21 C/7 F)
Water pressure 4.8 bar/70 P.S.I. max. .69 bar/10 P.S.I. min.