15CI100A with Rear Drain 25
User Interface Display Identification
Operation Display
Condition
Procedure
Normal
operation
—
Cleaning Mode Press and release maintenance/clean
switch to clean the user interface without
dispensing ice or water.
Drip tray full
Empty drip tray.
Six-month
periodic
maintenance
required
Follow Maintenance Mode procedure
(below) and also see
Cleaning and
Sanitizing Procedure
.
Maintenance
Mode
Enter Maintenance Mode by pressing
maintenance/clean switch until
displays. Complete the cleaning and
sanitizing procedure and change the
filter, if so equipped. Exit Maintenance
Mode by pressing and holding
maintenance/clean switch until
no
longer displays.
Service -
8000 hr
bushing check
Call Follett Technical Service Group at
(877) 612-5086 or +1 (610) 252-7301.
The flashing wrench indicates that the
8000 hr bushing check is required.
PM
Summary of Contents for chewblet 15CI100A
