Follett chewblet 15CI100A Installation, Operation And Service Manual Download Page 1

Installation and Service Videos:

www.follettice.com/servicevideolibrary 

01214261R01

801 Church Lane • Easton, PA 18040, USA

Toll free (877) 612-5086 • +1 (610) 252-7301

www.follettice.com

Installation, Operation and Service Manual 

Serial numbers after K39468

Countertop and Freestanding Ice and Water 

Dispenser with Chewblet

®

 Ice Machine 

Rear Drain Model

15CI100A

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding 
after-the-sale support. To ensure that this equipment delivers that same degree of service, review this guide 
carefully before you begin your installation. 
Should you need technical help, please call our Technical Service group at (877) 612-5086 or (610) 252-7301.
Please have your model number, serial number and complete and detailed explanation of the problem when 
contacting Technical Service.

Getting Started

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. All freight 
is to be inspected upon delivery. If visible signs of damage exist, please refuse delivery or sign your delivery receipt 
"damaged." Follett Customer Service must be notified within 48 hours. Wherever possible, please include detailed 
photos of the damage with the original packaging so that we may start the freight claim process.

Summary of Contents for chewblet 15CI100A





































Reviews: