Follett 7CI100A, Installation, Operation And Service Manual

Page: 20 / 48

20 7CI100A/7FS100A, 15CI100A/15FS100A
7. Install compression nozzle:
§
Remove and inspect compression nozzle O-ring seal.
Replace if damaged in any way.
§ Clean O-ring groove. Lubricate O-ring with Petrol-gel and
reinstall.
§ Install compression nozzle
(Fig. 26.1).
§
Install compression nozzle retainer (Fig. 26.2).
§
Install M6 socket head allen screw (Fig. 26.3).
Fig. 26
2
1
3
8. Install transport tube (Fig. 27.1).
9. Tighten hose clamp (Fig. 27.2). Fig. 27
1
2
10. Install gear motor:
§ Install main housing insulation
(Fig. 28.1).
§
Slide gear motor onto auger shaft (Fig. 28.2).
§
Install two M6x90 allen screws (Fig. 28.3).
Fig. 28
3
3
2
1