Follett 7CI100A, Installation, Operation And Service Manual

Page: 11 / 48

7CI100A/7FS100A, 15CI100A/15FS100A 11
Optional Leg Accessory Installation
1. If installing optional 6" Leg Accessory (item# 00956318), tilt or lay
base stand on side and screw each leg into stand (Fig. 8).
Fig. 8
Optional Internal Water Filter Installation
If your dispenser has the internal water filter option, the water filter
must be
installed for the dispenser to operate. Because internal components will need
to be accessed for both procedures, Follett recommends installing the water
filter just prior to initial sanitizing.
1. If installing the optional internal water filter, please complete the
steps shown in
Accessing Internal Components on page 12
before proceeding.
2. Lift and remove the top panel, set aside (Fig. 9.1).
3. Remove two screws (Fig. 9.2) and remove left side panel.
4. Install filter as shown. Turn filter clockwise until it is fully seated
(Fig. 9.3).
Fig. 9
1
2
3