92
21. Record
You can record measured data, occupied data and notes into the active JOB. The memory
is 60000 points in total.
21.1 Record Occupied Data
You can input occupied data into the active JOB. The record items include: occupied
coordinates, point number, instrument height, code, user, date, time, weather, wind,
temperature, air pressure and ppm. If the current occupied data have not been recorded in
the active JOB, the previous occupied data will be used as the active one.
【
Procedure of recording occupied data
】
1. Press F4: [
REC
] on P3 in basic measurement mode
to enter into record mode. The active JOB will
display.
2. Select “
1. Occ. data
” to set occupied station.
3. You can input the following items by hand: PT#,
instrument heigt(Inst.H), code, N0-E0-Z0, , user, date,
time, weather, wind, temperature, pressure, and ppm.
Press key “
▲
”/ “
▼
” to select item or press [
FUNC
]
to turn page.
Press F1:[
READ
] to read coordinate from memory.
See “
§
6.1 Input the occupied point data”.
Press F2:[
RES
] to enter resection program and get
the station coordinate
Press F3:[
REC
] to record the station coordinate into
memory.
At the page 2 of station setting screen, press F1:
[
0PPM
] to set ppm value as 0 directly.
4. Press F1: [
OK
] to set the station coordinate.
REC JOB-MY
1.Occ. data
2.Angle data
3.Coord data
4.Note
5.View
6.JOB select
Pt# J2
Inst.H 0.000m
Code ROAD
N0: 0.000
E0: 0.000
Z0: 0.000
User MA
READ
0
RES
0
REC
0
OK
0
Date :08/08/2006
Time :10:00:00
Weather
Wind
Temp
Pressure
ppm
0PPM
0
RES
0
REC
0
OK
:Cloudy
:Light
:25
℃
Meas PC 0.0
ppm 0
SD
VA 302.5432gon II
HA 0.0000gon P3
EDM OCC OFST R E C
