Foerster TAK5-CH1-25, Instruction Manual

Page: 186 / 226

186 Failures and warnings
> Once the failure has been removed, press to confirm de-
lete failure? .
This message disappears each time the bar electrode is free.
12.2.11 Mixer sensor
The warning mixer sensor is displayed if the temperature sen-
sor in the mixer jar is defective or the temperature in the mixer
jar falls below 0
o
C.
12.2.12 Milk empty
1. > device data > milk values > continue with MP
If in milk values you selected continue with MP , the feeding
process will not be broken off when the milk tank is empty.
2. Replenish the milk tank and press .
3. In milk: suck in? press and wait until the milk comes out
from the outlet bubble-free, thus effecting that the supply
electrode resp. the bar electrode continuously signal „cov-
ered“.
4. In delete warning? press as the reason for the warning
has been removed.
5. Confirm milk filled? with .
12.2.13 Unknown transmitters
The warning unknown transmitters is displayed when
•
the identification does not detect a transmitter which has not
been allocated to an animal number,
•
a transmitter number has been allocated to an animal number
but not registered yet.
warning
mixer sensor
mixer sensor
boiler: xx.x
o
C
mixer: xx.x
o
C
warning
milk empty
milk empty
suck in milk: start?
delete warning?
warning
unknown transmitters