SENSOR SYSTEM Ro 35 L
1.9 Personal safety equipment
SAFETY
1-4
6.461.21 - 2008/06
1.9 Personal safety equipment
You are to wear ear plugs, if the A-weighted equivalent sound pressure
level at the workstations of the sensor system is greater than 85 dB(A).
Sound pressure level for this equipment: see 2.4 Technical Data
1.10 Safety measures at the installation location
The sensor system must be installed stably on a machine foundation pro-
vided for it and must be firmly anchored to the foundation. If this is not
done, this will pose a potentially lethal risk.
NOTE
!
Ensure that the area surrounding the workstation is always clean and
unobstructed by issuing appropriate in-company instructions and con-
ducting inspections.
1.11 Protective safety devices
The CIRCOGRAPH sensor system is shut down
when opening the housing (safety switch on the rotor cover)
with the switch on the operating panel or on the electronic equipment
cabinet
with the EMERGENCY-STOP switch on the operating panel
(EMERGENCY-STOP has to be linked with motor control)
The protective safety devices
are installed to ensure the safety of the operating staff
may not be modified, removed or bypassed by making modifications to
the sensor system under any circumstances.
1.12 Behaviour in the event of an emergency
In an emergency, please immediately press the red EMERGENCY-STOP
switch. Have authorised personnel remedy the cause of the fault immedi-
ately.
