Focux DP48 User Manual Download Page 3

DP48 User Guide Page 

 

9. DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED OR GROUNDING-TYPE 
PLUG 

A Polarized plug has two blades with one wider than the other. A grounding-type plug has 
two blades and a third grounding prong. The wide blade or the third prongs are provided 
for your safety. If the provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet. 

 
10. PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED 
PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE 
THEY EXIT FROM THE APPARATUS.  
 

11. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER. 

 

12. USE ONLY WITH CART, STAND, TRIPOD, BRACKET, OR TABLE SPECIFIED BY THE 

MANUFACTURER, OR SOLD WITH THE APPARATUS. WHEN A CART IS USED, USE 

CAUTION WHEN MOVING THE CART/APPARATUS TO AVOID INJURY FROM TIP-OVER. 

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may 

fall, causing serious injury to someone, and serious damage to the appliance. A unit and 

cart combination should be moved with care. Quick stops, excessive force, and uneven 

surfaces may cause the product and cart combination to overturn. 

 

13. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR 

LONG PERIODS OF TIME. 

For added protection for this unit during a lightning storm, or when it is left unattended 

and unused for long periods of time, unplug it from the wall outlet and disconnect the 

antenna or cable system. This will prevent damage to the unit due to lightning and power 

line surges. 

 

14. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. SERVICING IS 

REQUIRED WHEN THE APPARATUS HAS BEEN DAMAGED IN ANYWAY, SUCH AS 

WHEN THE POWER SUPPLY CORD OR PLUG IS DAMAGED, LIQUID HAS BEEN SPILLED 

OR OBJECTS HAVE FALLEN INTO THE APPARATUS, THE APPARATUS HAS BEEN 

EXPOSED TO RAIN OR MOISTURE, DOES NOT OPERATE NORMALLY, OR HAS BEEN 

FROPPED. 

 

15. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE 

THIS APPARATUS TO RAIN OR MOISTURE. 

 

16. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO 

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE 

APPARATUS. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for DP48
























Reviews: