Focux DP48, User Manual, Page: 11 / 23

DP48 User Guide Page
11
•
LEVEL - Gain, -40.00dB to +12.00dB in 0.1dB steps.
•
POL - Polarity, can be normal (+) or inverted (-).
•
DELAY - Delay in 21us steps. Can be displayed in ms, ft or m. The
time unit of the delay can be changed in the
System
menu. The
maximum delay permitted is 1000ms.
OUI_1:XXXXXX MENU:Signal
LEVEL:0.00dB
POL :+
DELAY :0.105ms
-EQ - EQ parameters
•
EQ# - Selects one of the 6 available Equalizers.
•
LEVEL - EQ level gain. Ranges from -30.00dB to +15.00dB in
0.1dB steps.
•
FREQ - EQ center frequency. Ranges from 20 to 20,000Hz in either
1Hz steps or 1/36 octave steps
•
BW - EQ Bandwidth. Ranges from 0.05 to 3.00 octaves in steps of 0.01
octave steps for PEQ.The Q value is automatically shown beneath the
octave value. For Lo-Sht or Hi-Shf, it is either 6 or 12dB/Oct.
Type - Type of EQ. The types can be parametric (PEQ), Lo-shelf
(Lo-shf) and Hi-shelf (Hi-shf).
.
OUT_1:xxxxxx MENU: EQ
EQ#:EQ1 BW:0.50oct
LEVEL:0.00dB Q=28.85
FREQ : 1000HZ TYPE:PEQ
-X’Over - Crossover Parameters
•
FTRH - Filter Type of low frequency crossover point (high pass).
Types can be Butterworth, Linkritz Riley or Bessel.
•
FRQH - Filter cut-off Frequency of low frequency crossover point
(high pass). Ranges from 20 to 20,000Hz in either 1Hz steps or
1/36 octave steps. The frequency steps can be selected in the
•
SLPH - Filter Slope of low frequency crossover point (high pass).
Ranges from 12 to 48dB/octave. If the selected Filter Type is
Linkritz Riley, the available slopes are 12 / 18 / 24 / 48 dB/octave.