Focux DP48, User Manual, Page: 13 / 23

DP48 User Guide Page
13
Name - Channel Name
•
Name - Channel name. It is 6 characters in length.
OUT 1:XXXXXX MENU:Name
NAME:XXXXXX
6.2 System Menus
The System Menus allow the user to control and change parameters that
are related to the system behavior and general operation. It can be
accessed by pressing the Edit one touch key
SYSTEM MENU
– use the rotary thumb wheel to select and press to confirm
selection
*Load a X’Over
Store a X’Over
Erase a X’Over
System Set
Signal Generate
-Load a X’Over - Program Recall
The DP48 has a built in non-volatile memory that can store up to 30 different
program setups. A program can be recalled using this menu.
Load a X’Over – use the rotary thumb wheel to select and press to confirm
selection
*User Mode
Factory Mode
Load a X’Over : User Mode
*1
2
3…
•
PROG - Program Number to be recalled.
-Store a X’Over - Program store,
– use the rotary thumb wheel to select and
press to confirm selection
The DP48 has a built in non-volatile memory that can store up to 30 different
program setups. A program can be stored using this menu. The old