manualshive.com logo in svg

Focusrite Clarett 8PreX, User Manual

Share
Download
Focusrite Clarett 8PreX User Manual Download Page 7

7

11. . ANALOG, S/PDIF, ADAT 1 & ADAT 2 – .input .meter .source .LEDs. .Indicates .the .current .signal .

source .for .the .input .meters. .Meter .source .selection .is .made .from .Focusrite .Control.

12. .

(Thunderbolt . active) . – . a . green . LED . which . illuminates . when . the . unit . has . established . a .

connection .with .the .computer .to .which .it .is .connected.

13. . MIDI .– .a .green .LED .which .illuminates .when .MIDI .data .is .being .received .at .the .rear .panel . .

MIDI IN .port.

14. .

– .a .green .LED .which .confirms .clock .synchronisation, .either .to .the .Clarett .8PreX’s .internal .

clock .or .to .an .external .digital .input.

15. . MONITOR .– .main .monitor .output .level .control .– .this .control .will .normally .control .the .level .

at .the .main .monitor .outputs .on .the .rear .panel, .but .can .be .configured .in .Focusrite .Control .to .

adjust .the .level .of .any .of .the .unit’s .ten .analogue .outputs.

16. . DIM .and .MUTE .– .two .switches .controlling .the .Clarett .8PreX’s .monitor .outputs; .DIM .reduces .

the .output .levels .by .18 .dB, .while .MUTE .turns .the .outputs .off. .By .default, .these .switches .affect .

the .main .monitor .outputs .1 .and .2, .but .they .will .also .affect .any .analogue .outputs .that .have .been .

selected .for .front .panel .monitor .control .using .Focusrite .Control. .The .switches .are .internally .

illuminated .(DIM: .yellow, .MUTE: .red) .indicating .that .the .function .is .selected.

17. . Headphones .1 .and .2 .– .connect .one .or .two .pairs .of .stereo .headphones .at .the .two .¼” . .TRS .

jack .sockets .below .the .controls. .The .headphone .outputs .always .carry .the .signals .that .are .

currently .routed .to .analogue .outputs .7/8 .and .9/10 .in .Focusrite .Control.

18. . POWER .– .AC .power .switch .and .LED.
19. . Rack .ears .for .mounting .the .Clarett .8PreX .in .a .standard .19” .equipment .rack.

Summary of Contents for Clarett 8PreX





















Reviews:

No comments

Brands by name

Popular brands

Load more brands