manualshive.com logo in svg

Focusrite Clarett 8PreX, User Manual

Share
Download
Focusrite Clarett 8PreX User Manual Download Page 11

11

Connecting Clarett 8PreX to loudspeakers

The . 1/4” . jack . MONITOR . outputs . on . the . rear . panel . (Line . Outputs . 1 . and . 2) . will . normally . be . used .

to .drive .monitoring .speakers. .Self-powered .monitors .(also .known .as .active .monitors) .incorporate .

internal . amplifiers, . and . may . be . connected . directly. . Passive . loudspeakers . will . require . a . separate .

stereo .amplifier; .in .this .case, .the .rear .panel .outputs .should .be .connected .to .the .amplifier’s .inputs.

All .the .line .output .connectors .are .3-pole .(TRS) .¼” .jack .sockets, .and .are .electronically .balanced. .

Typical .consumer .(hi-fi) .amplifiers .and .small .powered .monitors .will .have .unbalanced .inputs, .either .

on .phono .(RCA) .sockets, .or .via .a .3.5 .mm .3-pole .jack .plug .intended .for .direct .connection .to .a .computer. .

In .either .case, .use .a .suitable .connecting .cable .with .jack .plugs .at .one .end. .

Professional .power .amplifiers .will .generally .have .balanced .inputs.

When .mixing, .you .can .connect .several .pairs .of .additional .speakers .(mid-field. .near-field, .etc.) .to .

pairs .of .outputs .and .use .Focusrite .Control .to .route .your .mix .to .the .different .outputs .as .desired, .to .

check .your .mix .on .the .different .types .of .speaker.

Connecting .active .speakers

Connecting .passive .speakers

Summary of Contents for Clarett 8PreX





















Reviews:

No comments

Brands by name

Popular brands

Load more brands