manualshive.com logo in svg

Focusrite Clarett 8PreX, User Manual

Share
Download
Focusrite Clarett 8PreX User Manual Download Page 15

15

4. .Using .the .optical .connections .to .provide .additional .outputs

The . Clarett . 8PreX’s . two . ADAT . output . ports . (OPTICAL  OUT) . may . be . used . to . feed . separate . D-A .

converters .to .provide .additional .analogue .outputs. .The .Focusrite .OctoPre .MkII .DYNAMIC .is .a .suitable .

8-channel .unit .for .this .purpose. .As .with .the .optical .inputs, .each .optical .output .can .carry .8 .audio .

channels .at .44.1/48 .kHz .sample .rate, .four .at .88.2/96 .kHz .or .two .at .176.4/192 .kHz. .This .is .an .excellent .

method .of .providing .multiple .analogue .outputs .to .feed .a .mixing .console, .which .may .be .a .preferred .

way .of .performing .a .complex .mix .from .a .large .number .of .DAW .tracks.

Wordclock between 

both OctoPre devices

and Clarett 8PreX 

is via ADAT links.

Optical ADAT (TOSLINK)

Optical ADAT

(TOSLINK)

OctoPre MKII 

Dynamic

OctoPre MKII 

Dynamic

Computer running DAW

and Focusrite Control

Thunderbolt

TM

Up to 26 Anal

ogue Outputs

In .the .example, .the .OPTICAL IN 1-8 .ports .of .the .two .OctoPre .MkII .DYNAMICs .are .connected .to .the .

Clarett .8PreX’s .OPTICAL OUT .ports .with .two .TOSLINK .optical .cables. .The .additional .outputs .thus .

created .may .be .routed .within .Focusrite .Control .in .exactly .the .same .manner .as .the .other .outputs. .

In .this .situation, .synchronisation .is .achieved .by .setting .the .Clarett .8PreX’s .sync .source .to .INT .(thus .

defining .it .as .the .sync .master) .and .setting .the .sync .source .for .both .OctoPre .MkII .DYNAMICs .to .ADAT. .

This .means .that .all .synchronisation .is .via .the .optical .links .and .no .additional .cables .are .required.

NOTE: .when .interconnecting .two .digital .devices .by .any .method, .always .ensure .that .both .are .set .to .

use .the .same .sample .rate.

Summary of Contents for Clarett 8PreX





















Reviews:

No comments

Brands by name

Popular brands

Load more brands