Focus MCSDI-1, User Manual

Page: 30 / 36

Setup with Camera
MCSDI-1 Portable SD/HD-SDI Media Converter
16
Connecting Camera to MCSDI-1
Connections will depend on the camera being used. Refer to camera
documentation for information about type of video output and
location of connectors.
If the MCSDI-1 does not
automatically detect a new input
type, power-cycle the MCSDI-1
unit.
1.
Determine the camera’s type of
video output: SD/HD,
component, composite, or
HDMI.
Do Not Change Input
Connections During
Critical Usage
The SDI output stream is
disrupted when connecting or
disconnecting a device.
2. Connect cable(s) between the
camera’s video out and the
MCSDI-1’s input connectors.
Component Video Input
3 RCA jacks: Y, Pb and Pr.
Composite, Y/C (S-Video)
2 RCA jacks: Y (composite) and
C.
For S-video connections use a
Y/C breakout cable to make the
is connection.
Y/C Breakout Cable
(not included)