Focus MCSDI-1, User Manual

Page: 28 / 36

Setup with Camera
MCSDI-1 Portable SD/HD-SDI Media Converter
14
Mounting Video Camera to the MCSDI-1
1.
Position camera mounting
holes on the bottom of the
camera with the alignment pin
and mounting screw on the top
of the MCSDI-1.
The alignment pin is spring
loaded. If the camera does not
have an alignment hole, the pin
retracts out of the way.
The front of the camera and
MCSDI-1 should point in the
same direction.
2. Thread the MCSDI-1’s
mounting screw into the
camera’s tripod socket.
To turn the mounting screw,
locate the brass head of the
mounting screw on the bottom
of the MCSDI-1. Use a coin or
screwdriver to turn the screw.
This screw also functions as the
MCSDI-1’s tripod socket.
3. Tighten the mounting screw so
that the camera and MCSDI-1
are firmly attached.
Do Not Over Tighten
.