2
9
9. Now, stick together shift hose with help cable and pull
straight. Some sensitiveness is required here.
10. Push at front and pull at rear end to move cable housing through the frame.
11. When shift cable is installed successfully to frame, put
rubber plug on hose and push into cable exit hole (dust &
water protection).
12. Front Derailleur Cable is moved and guided through left
hand side channel of stem. Push cable hose through
downtube until BB shell.
13. Plug end of Front Derailleur Cable Hose tightly into Cable
Tunnel (Open End Cap has been pre istalled before!). It helps
to use some needle-nose pliers for connecting those two
parts witch each others.
