20
5. Insert cone. DO NOT USE GREASE!
6. Insert IGUS bush bearing. DO NOT USE GREASE!
7. Put black aluminum ring (toothed) and compressor cap
together and insert into upper part of head tube. Tooth of
aluminum ring must point towards frame (to back) and face
down.
8. Insert stem into head tube´s gap. Take care the tooth of
aluminum ring catches pocket on rear end of stem.
9. Push fork through sterer, bearings and stem from below
in one step.
10. Tighten compressor cap (6mm Allen Key) from above
with 6 Nm torque.
DO NOT USE
GREASE!
DO NOT USE
GREASE!
