Focus 3.2 User Manual Download Page 139

Page: 139 / 206

External Control Commands

125

mpgLoadNextDef

This command queues an MPEG file to play when the current
video file finishes. This command adds file to a looping playlist.

Syntax

mpgLoadNextdef 0

channel videoname

Parameters

channel

The channel on the Firefly (0)

videoname

The full path and video name of the MPEG file to load. (See description
for mpgLoad.)

Return Values

This command returns

ACK

to indicate that the file was loaded

successfully, or

NAK

to indicate that the file could not be loaded

(e.g., the file was not found).

mpgClearDef

This command clears the default (looping) playlist. This cancels
the playlist defined by mpgLoadDef and mpgLoadNextDef and the
playlist loaded by the Firefly at startup.

Syntax

mpgClearDef 0

channel

Parameters

channel

The channel on the Firefly (0)

Return Values

This command returns

ACK

if the file load was started

successfully, or

NAK

if the file could not be loaded (e.g., the file

was not found).

Summary of Contents for 3.2















































































































































































































Search results

Summary of Contents for 3.2

Reviews:

Related manuals for 3.2

Brands by name

Popular brands

Focus 3.2, User Manual

Search results

Summary of Contents for 3.2

Reviews:

Related manuals for 3.2

Brands by name

Popular brands