Focus 3.2 User Manual Download

Page: 25 / 206

Quick Start Plug and Play

Configure FTP

Setup on-board Firefly FTP Server

•

Configure Firefly properties.

•

Configure Firefly FTP server.

Configure Firefly Properties

1. Open the Main window of Media Messenger.
2. Right-click in the Firefly object in the Network Pane and

display Player drop down menu.

3. Click on Properties to display Player Configuration.
4. Fill in the Player Configuration fields.

Set to one for Firefly.

Unique ID set in player before
installation, Media Messenger
uses it to identify the player.

If player belongs to a group,
select the group name from-
list.

Unique name to identify player
(Host Name)

Physical location of the player.

Summary of Contents for 3.2















































































































































































































Search results

Summary of Contents for 3.2

Reviews:

Related manuals for 3.2

Brands by name

Popular brands

Focus 3.2, User Manual

Search results

Summary of Contents for 3.2

Reviews:

Related manuals for 3.2

Brands by name

Popular brands