Focus 3.2 User Manual Download Page 140

Page: 140 / 206

External Control Commands

126

mpgPlay

This command plays a previously loaded MPEG file on the
specified channel. The file must have already been loaded using
the

mpgLoad

command.

Syntax

mpgPlay 0

channel

Parameters

channel

The channel on the Firefly (0)

Return Values

This command returns

ACK

if playback was started successfully,

NAK

if playback could not be started (e.g., no file previously

loaded).

mpgStop

This command stops playback of an MPEG file that is currently
playing on the specified channel.

Syntax

mpgStop 0

channel

Parameters

channel

The channel on the Firefly (0)

Return Values

This command returns

ACK

if playback was stopped successfully,

NAK

if playback could not be stopped (e.g., no file currently

playing).

Summary of Contents for 3.2















































































































































































































Search results

Summary of Contents for 3.2

Reviews:

Related manuals for 3.2

Brands by name

Popular brands

Focus 3.2, User Manual

Search results

Summary of Contents for 3.2

Reviews:

Related manuals for 3.2

Brands by name

Popular brands