Focus Industries Handler I, Manual, Page: 33 / 48

33 Handler I, II & III Operator’s Manual - October 2008
Handler II Tank Cleanout
Figure H2-5.7
Close lid and open Container Rinse Valve to rinse Handler
Tank, (See Figure H2-5.7) When rinsing is complete, close
Container Rinse Valve to stop flow of water into Handler
tank.
NOTE: rinse water is being continuously sent off to sprayer
as rinsing is occurring.
Close Venturi Valve to stop suction from Handler tank.
Figure H2-5.4
To fill remainder of the sprayer tank with fresh water, move
handle on Main Valve to bypass position, (See Figure
H2-5.4) This terminates the flow of product/water from the
Handler tank, allowing fresh water from the source tank to
bypass the venturi system and finish filling the sprayer tank.
1.
•
2.
3.
Figure H2-5.5
When desired sprayer tank volume is achieved, move handle
on Main Valve to closed position, (See Figure H2-5.5)
Handler III Tank Cleanout
Figure H3-5.7
Close lid and open Rotaflush valve to rinse Handler Tank.
When rinsing is complete, close Rotaflush Valve to stop
flow of water into Handler tank.
NOTE: rinse water is being continuously sent off to sprayer
as rinsing is occurring.
Close Venturi Valve to stop suction from Handler tank.
To fill remainder of the sprayer tank with fresh water, move
handle on Main Valve to bypass position, (See Figure H2-
5.4). This terminates the flow of product/water from the
Handler tank, allowing fresh water from the source tank to
bypass the venturi system and finish filling the sprayer tank.
When desired sprayer tank volume is achieved, move handle
on Main Valve to closed position, (See Figure H2-5.5).
4.
1.
•
2.
3.
4.