background image

13

©

2014 Focal Point Fires plc.

12.0 TROUBLESHOOTING GUIDE

Fire is not switching on

Ensure mains switch is on

Replace the fuse in the plug

Fire is not emitting any heat

The fire is fitted with an energy saving thermostat. If the temperature in the room 

is higher than the temperature selected on the fire, then the thermostat will stop 

the heater from turning on. For example, if the room temperature is 22ºc or above

and the fires heater is set at 22ºc, then the heater will not be required until the 

room temperature drops below 22ºc. If this is the case select a higher temperature

setting than the room’s temperature and the heater will begin to operate.

Fire shuts off after a period of time

Check that the temperature is not set onto the lower settings.  If the room is 

warm enough the thermostat will stop the fire switching the heat on.

Check that the chimney/flue is blocked off.

Fire seems noisy

There is a level of noise when the flame effect is in use, caused by a motor that 

helps generate the effect. This noise will be heard when there is no other 

background noise.

There is a higher level of noise associated with the heater motor; this is due to 

the air flow required when heat has been selected.

Remote is not operating

Check or replace batteries.

GB IE

The 3 year guarantee only covers products purchased on or after 1st February 2009. For all gas fires purchased the 3 year

guarantee commences from the date of purchase, provided that the following 3 terms and conditions are adhered to:

For all electric fires purchased the 3 year guarantee commences from the date of purchase, providing that you can supply the

proof of purchase. This does not cover consumable items such as pebbles, coals or light bulbs. Purchase(s) must be made

through an authorised stockist.

Making a claim

Making a claim is easy. If you wish to make a claim under our guarantee and all the terms and conditions for your product have

been met then please submit the following information for the attention of the 3G Service Department to the address below.

Alternatively, you can email or fax.

Focal Point Fires, 3G Service Department, Reid Street, Christchurch, Dorset, BH23 2BT.

Email: [email protected]

Fax. 01202 588639.

Details required: 

1. Name, full address including postal code and contact telephone number.

2. A copy of your proof of purchase e.g. receipt, bank statement or sales order number

3. Original installers Gas Safe registration number (gas fires only).

4. Annual service receipt for every 12 months (gas fires only).

13.0 GUARANTEE - TERMS AND CONDITIONS

F8

61

27

5

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

As our policy is one of continuous improvement and development, we therefore hope that you will understand we must retain the right to amend details and/or specifications without prior notice.

Summary of Contents for EF11-36 PASADENA LIMOUSIN














Reviews: