12
10.0 OPERATING THE APPLIANCE - CONTINUED
GB IE
©
2014 Focal Point Fires plc.
Using the Timer Control Button
Pressing the timer control button (5) will set the timer.
NOTE: If this product experiences exceptionally
high temperature, it may automatically stop heating. If this
occurs the product should be unplugged or isolated from the
main supply for a period of 30 seconds before the power is
then re-supplied.
Using the Timer Control Button
To turn off the heat mode, press and hold the control panel heater button for 10 seconds to enter heat lock out mode.
Ember bed lights will flash 6 times to signal the heat function is turned off and locked out.
When the heater button is pressed in lock out mode, the ember bed will flash 6 times until heating mode is turned on.
To turn on heating mode, press and hold the control panel heater button for 10 seconds, the ember bed will flash 6 times and the heat
function will be restored.
Manual ON/OFF switch
There is a manual ON/OFF switch is located on the right hand side of the appliance. This allows the user to turn the appliance on or off.
Manual ON/OFF Switch
ALWAYS DISCONNECT THE APPLIANCE FROM THE MAINS SUPPLY OUTLET
SOCKET BEFORE UNDERTAKING ANY CLEANING OR MAINTENANCE!
For general cleaning use a soft clean duster - never use harsh abrasive or cleaners. The glass viewing screen should be cleaned
carefully with a soft cloth.
If in doubt consult a qualified electrician. Refer to Section 3.0 Appliance Data for fuse specification. Excluding fuses, use only
genuine manufacturers spare parts available from your supplier.
Replacing the remote control battery:
When the battery becomes weak, the range of the remote control becomes shorter. Replace the battery with a new CR2025
lithium battery.
Note: Keep the lithium battery out of the reach of children.
11.0 CLEANING AND MAINTENANCE
