Program application
Three digital memory settings are
accessible on the remote control
(button
,
or
). The factory
settings correspond generally to a
range of applications. The “Hi-fi”
mode corresponds to a setting, which
is as linear as possible, with a well-
integrated and deep bass. “Cinema”
is calibrated to be more demonstrative
and dynamic to highlight performance
in film soundtracks. In the “User”
mode, all corrections and filters are
deactivated. All these settings can be
modified at will. Consult the table at
the end of the manual to return to the
factory settings.
Application
Adjusting the volume
Adjusting the volume (button
)
allows a proper output level of the
subwoofer compared to those of
the other speakers in the system.
Establishing this by remote control
permits a very precise fine-tuning of
the level according to the nature of
the listening material.
“Night” mode
This type of digital, dynamic
compression of the signal permits
the user to avoid large differences
in playback level between weak and
powerful signals. Weak signals are
increased so that the bass is more
present and satisfactory, even at
low listening levels, while powerful
signals are decreased in amplitude.
This function allows for an excellent
listening comfort in bass response,
even at very low listening levels, and
to avoid disturbing the neighbors or
others nearby.
The default message “FOCAL Profile”
appears highlighted on the display
when in “Night” mode (button
).
Start-up and shut-down
Turn the power switch on the back
of the unit to the “On” position.
A “Loading” message will appear on
the display (this will only ever appear
as start-up and shut-down of the
subwoofer).
Thanks to the integrated “Auto-
power” setting, start-up is automatic
on receiving an audio signal on the
analog inputs. The message “FOCAL
Profile” which appears on the screen
indicates that the subwoofer is
operational and awaiting instruction.
Start-up can also be attained
(ex: setting parameters of the
subwoofer without an analog signal,
see following chapter) by pressing the
button on the remote.
In absence of an input audio signal,
stand-by is as well automatic after
approximately a period of 15 minutes.
Stand-by can also be attained by
pressing on the
button on the
remote.
When absent for several days, it is
recommended to turn the power
switch to “Off” on the back of the
amplifier.
During an electrical storm, disconnect
the mains cable.
17
