Model 920 Ethernet Data Multiplexer Manual
Focal Technologies Corporation
Page 6-4
A Moog Inc. Company
920-0603-00 Rev K
6.6 Model 920 EDM Product Handling
General Handling
Care must always be taken during the handling of the Model 920 EDM to ensure product integrity. The following
guidelines should be observed while working it:
Handle products at an ESD safe workstation with a clean surface
Ensure fibers are not crimped or moved away from their intended routes
Ensure any disconnected optical connectors are cleaned immediately prior to reconnection
Do not exceed the recommended minimum fiber bend radius, even momentarily
Mishandling may cause damage to the enclosure, the fiber bushing, DIN Mount connector, or internal
components. The modems must always be handled appropriately during installation, operation,
maintenance, storage, and transportation to ensure safe and problem free operation.
Any visible damage or evidence of loose parts inside the enclosure requires removal of the modem
from operation and investigation by qualified service personnel.t
